High Quality BLDC Controller, Brushless Motor, 3 Phase Brushless DC Motor Controller Suppliers in China

Home > Products > Brushless DC Motor Driver > Brushless DC Motor Driver with Ce Certification (BLMD-2205)

Brushless DC Motor Driver with Ce Certification (BLMD-2205)

Product Description

The Specification of high performance controller:
BLMD2205 controller uses dedicated high-performance Brushless DC Motor IC from USA. This controller is suitable for driving brushless dc motors with small and medium power. The motor operates with high speed, small vibration, low noise and stable running due to the new PWM technology

1. Characteristic
1Power AC voltage110VAC-220VAC
2PWM frequencyNo less than 12KHZ
3Drive currentUp to 6A. It also can be
designed according to user's
4Dimensions175 * 105 * 40
6Two functions of controllerJump line field W with short connection. After the power running motor without Hall, the Hall cannot be used. Jump line field W not shorted. Running motor with Hall after the power.
7Open loop
&closed loop
speed control
General Settings for the open loop before delivery, Users can request to set the maximum closed loop speed. Users can own change the maximum closed loop speed. The change of closed loop speed should be operated by professionals.

2. Pin description
1110V-220V terminalAC input or external DC power
2U terminalMotor phase U
3V terminalMotor phase V
4W terminalMotor phase w
5+ 5V terminalHall element power, the controlled provided
6GND terminalHall element power negative terminal  namely 0V
7HALL AHall element phase A
8HALL BHall element phase B
9HALL CHall element phase C
10CW terminalMotor's enable terminal for
forward run, effective with low level
11CCW terminalMotor's enable terminal for reverse run, effective with low level
12DA terminalSpeed control terminal, usually 0-5V
13+5/FUNC terminalHall frequency output or alarm output. Drive normal, internal photoelectric switch through. Driver faulty, internal photoelectric switch off. The current is lower than 15A. This function is requested by customer.
14Jump line field W with short connectionMotors runs without Hall
15Jump line field W is not short connectedMotors runs with Hall

3. Electrical Characteristics (Tj=25ºC)
3.1 AC voltage 110VAC-220VAC or DC voltage less than 350VDC
3.2 Maximum output current: 6A. It also can be designed according       to user 's requirements
3.3 Insulation resistance :higher than 500MΩ

4. Using environment and parameters
4.1 Cooling: natural cooling or forced air cooling
4.2 Environment: no dust and corrosive gases
4.3 Temperature: 0 ° C- + 50 ° C
4.4 Humidity: 40- 89% RH

5. Mechanical installation

Chart 1 Mechanical Dimension

6. Power supply
The normal operating voltage is AC voltage from 110VAC to 220VAC or DC voltage less than 350VDC

7. Driver Wiring
A complete brushless DC Motor control system should contain a brushless Dc Motor, brushless DC motor controller, DC power and control signals. The following is a typical system diagram

 Chart 2  Drive wiring diagram
Brushless DC Motor Driver with Ce Certification (BLMD-2205)

Contact us if you need more details on BLDC Controller. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Brushless Motor、3 Phase Brushless DC Motor Controller. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Brushless DC Motor Driver

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters